How To Wall Mount Your Wireless Router, Or Any Other Gadget

Rate this post
How To Wall Mount Your Wireless Router, Or Any Other Gadget

Mounting electronics to the wall has many advantages: it gets them out of the way, it frees up space, and it looks nicer. There is an additional advantage to wall mounting your wireless router; the correct place, such as high up on your wall, may significantly boost WiFi coverage. Keep in mind that the typical 1/2-wave dipole antenna emits RF energy in the form of a doughnut. As a result, while mounting your wireless router, ensure sure it is positioned such that it delivers best reception across your house.

Mounting seems to be a do-it-yourself project requiring handicraft skills and specialized materials. There are correct methods and then there are ingenious workarounds. I’m here to demonstrate both. Regardless of whether you have any equipment or expertise, at least one of three ways – screw it, hang it, or tape it – will work for you.

Screw It

This is certainly the right way to wall mount a router or any other device.

Equipment:

  • drill and/or screw driver.
  • Depending on the weight and the kind of wall, screws and anchors may be used.
  • handicraft skills.

Most WiFi routers and other wall-mounted equipment include screw-fitting holes or grooves.

My most recent router even included screws, wall plugs, and an adhesive paper template for drilling the holes.

This is a clever and user-friendly design. Don’t be concerned if your equipment was not well-designed. Wall plugs and screws are determined by the kind of wall, and identifying the holes to be drilled is the simplest part.

First, locate and avoid any electrical cables in your wall.

Wires often run vertically or horizontally between switches, electrical outlets, and junctions in brick or concrete walls. You should avoid horizontal and vertical connections, as well as the near vicinity of an outlet, switch, or junction. The wiring in older homes or self-built walls may be inconsistent. Use a wire finder to be on the safe side.

  How to Make an Image Background Transparent: 7 Different Ways

Wires in drywall usually run horizontally through the wall 6″ to 12″ above the receptacles. In addition, the wire goes about 1-3/4″ deep in the studs that support the wall. So, as long as you dig no deeper than that, you should be OK. To be absolutely certain, use a wire finder.

Second, choose the appropriate screw, wall plug / anchor, and wall location to support your wall mount.

The advantage of brick or concrete walls is that you can basically drill anywhere, provided the area is free of electrical wires. Unless you use a special concrete screw, you do need a wall plug that matches the size of your screw, otherwise the screw will be loose. In solid materials, you can use plastic expansion anchors (shown below) (shown below).To support heavier loads in solid walls, use thicker and longer screws. In drywalls, expansion anchors will support loads of up to 10 pounds.

If you have drywalls, find the wooden studs in your wall(see further down) and screw right in there. For light gadgets you don’t need to drill a hole. Your hardware store has special drywall or wood screws for that purpose. Both types of screws have a pointy tip and are self-tapping.

If your indoors drywallsare supported by metal studs, avoid the studs and look into special drywall anchors instead. Like wood screws,EZ-Ancors are self-starting, but drilling a guide hole is recommended. The EZ-Ancors will support loads up to 20 pounds.

Moly Boltsor similar type anchors are ideal for hollow walls. They will split in the middle or at the end once the screw is inserted. This results in a firm clamp between the screw head and its split half behind the wall. Make sure you pick the right depth between screw head and splitting part.

  How to Set Up a New Gmail Account for Yourself or Others

Bolts give robust support whether the weight being held by the screw pushes downwards or outwards. Use a toggle bolt for larger weights of up to 50 pounds.

Check out this video for additional information and pictures on how to install anchors:

You’re probably wondering how to locate the wall studs at this point. There are stud finders that are sold in conjunction with wire finders. If you don’t want to invest in such a gadget, a powerful magnet will suffice. It will identify drywall screws and nails used to secure the drywall to the studs. Aluminium studs will not be found by a magnet since Al is not a ferromagnetic metal. Steel studs, on the other hand, depending on their particular structure, may be magnetic.

Alternatively, you might drill a tiny hole in your drywall and then fill it with spackling paste. Take a 20+” wire and bend it in the center before inserting it into the hole and rotating it until you strike something firm on each side. The wire may help you determine how far the stud is from the hole you drilled. Given that suds are often located on 16″ or 24″ centers, you should now be able to locate the studs in your wall.

Finally, as seen in the video below, you may apply logic and a basic test.

If your gadget didn’t arrive with screw holes, you’ll need to find a solution, such as fastening it between two screws using elastic bands, like this person does:

Hang It

If the item you wish to attach isn’t too heavy and the end product just has to be functional rather than attractive, you may be able to hang it. The benefit is that no expertise or equipment are required, and it works on most kinds of walls.

  How to Spot a Fake MicroSD Card and Avoid Being Scammed

Equipment:

  • pin or small nail
  • every form of thread or zip tie

Your gadget must have something around which you can wrap the zip tie or thread. Wireless routers often include air vents, and the bars between them are suitable for this rudimentary sort of wall installation. The following video demonstrates the details:

Tape It

You may also try taping the gadget to the wall, depending on the construction of the wall. For example, to reduce computer wire clutter beneath my desk, I Velcro-mounted my modem.

Equipment:

  • even surface
  • industrial velcro or double-sided tape

Alternatively, you could use Sugru, a self-setting rubber, to make a bespoke mount that clings to many different sorts of surfaces while it’s new but transforms into non-adhesive rubber overnight at ambient temperature.

Conclusion

Wall mounting is an art form in and of itself. The good news is that it is something that can be learnt. And if you’re still afraid of drilling or other difficult handicraft activities, there are many more options than the ones I described above. Do seek for help at a hardware shop; such folks typically have a perfect answer for any ability level.

What is your preferred wall mounting strategy for a router or other device? Have you ever had anything fall after you had mounted it? Please share your experiences in the comments section!

You are looking for information, articles, knowledge about the topic How To Wall Mount Your Wireless Router, Or Any Other Gadget on internet, you do not find the information you need! Here are the best content compiled and compiled by the achindutemple.org team, along with other related topics such as: How.

Similar Posts