There are many methods for remotely accessing and managing your wireless router. To access and operate the Wi-Fi router remotely, activate the remote monitoring feature in certain routers or utilize a DDNS service if you have dynamic IP. However, since they are unsafe techniques, they are blocked by default.
When connecting your router or devices to the internet, it is vital to secure the connection to prevent unwanted access and assaults. This post will teach you how to use the free and secure Cloudflare Tunnels to securely access and operate your Wi-Fi router and other instances, such as local web servers.
Reasons to Access Wi-Fi Router Remotely
Before we proceed with the configuration, we must first examine the requirement to remotely access a Wi-Fi router. Here are several examples:
- You often have to diagnose and repair your parents’ Wi-Fi network.
- Control access and parental control.
- Keep track of network or bandwidth utilization.
- Keep an eye on your children when they are playing internet games or studying.
If you have a problem with your home Wi-Fi or LAN network, here’s all you need to know about repairing your internet connection.
Things You Will Need
To set up a Cloudflare Tunnel for remote access to your Wi-Fi network, you may use any old laptop or a Raspberry Pi, such as the Raspberry Pi Zero W.
- We’ll be using a $10 Raspberry Pi Zero W for this tutorial. It’s inexpensive, tiny, and wirelessly connects to your home wireless LAN network.
- You will also need to join up for and establish a free Cloudflare account.
- A domain name that is registered. You may get a free.tk domain name from Freenom.com or buy one from any of the leading domain name registrars.
Install and Set Up a Cloudflare Tunnel
Install and configure a Cloudflare Tunnel on a Raspberry Pi Zero W for secure remote access to your Wi-Fi network using the instructions below.
Step 1: Add Domain to Cloudflare
Follow these steps after registering the domain and establishing the Cloudflare account to add it to Cloudflare.
- Go to Websites in Cloudflare and select Add a site.
- Enter the domain name and press the Add site button.
- Under Free plan, click Get Started.
- Click Continue > Confirm.
- Copy the nameservers and paste them into your Freenom or domain registrar account.
- Click Done, then verify the nameservers and finish later.
That’s it. Your domain will now be added to Cloudflare.
Step 2: Install and Authenticate Cloudflared
Flash the Raspbian Lite OS to your Raspberry Pi Zero W SD card using Raspberry Pi Imager.
Create an empty SSH file on the boot partition after flashing the OS file. Also, add the following to the wpa supplicant.conf file.
Replace the NETWORK-NAME and NETWORK-PASSWORD entries before copying/pasting the file into the boot partition’s root.
The SD card should now be inserted into the Raspberry Pi Zero W, and the power supply should be connected. Once it has booted, use the Advance IP Scanner program to determine the IP address.
Then, on your Windows PC, launch Putty, input the Raspberry Pi IP address, and click Open. Select Yes, and then log in as pi with the password raspberry.
Execute the following commands to install and configure cloudflared.
sudo apt wget https:
tar -xvzf cloudflared_2022.7.1_arm.tar.gz
sudo cp ./cloudflared /usr/local/bin
sudo chmod +x /usr/local/bin/cloudflared
Copy the URL from the terminal window and paste it into your web browser to approve the domain.
Step 3: Create a Secure Tunnel to Access the Router Remotely
Run the following command in the terminal window to construct a tunnel. ,
cloudflared tunnel create <TunnelName>
This will produce a JSON file as well as a tunnel with a UUID. Take note of the UUID and JSON file location.
The tunnel may then be configured by generating and updating the configuration file or config.yml file.
sudo nano ~/.cloudflared/config.yml
Now, paste the following line of code.
- hostname: myrouter.MyDomain.com
- service: http_status:404
Replace the tunnel UUID and credentials-file path (JSON file path), as well as the hostname you wish to use to access the router remotely. You may add as many hostname entries as you wish to remotely access other devices or services. If you have an IP camera, for example, you may redirect the stream to a hostname and view the camera feed remotely. It is safe and encrypted.
To save the changes, use CTRL+X, then Y, followed by the Enter key. Then, run the following command to create a DNS entry:
cloudflared tunnel route DNS <TunnelName> <HostName>
You may alternatively log in to your Cloudflare account, click Domain, and create a CNAME entry in the DNS settings for the hostname.
Finally, you may launch the tunnel to remotely access and control your Wi-Fi router.
cloudflare tunnel run <TunnelName>
Once the tunnel has begun, use a web browser and go to the hostname you specified to get remote access to the router. Furthermore, it is essential that you follow our easy router and Wi-Fi router security advice.
If you get any issues, examine the configuration file and update the hostname entries, as well as validate the tunnel ID and JSON path.
You may also use the following commands to build, remove, start, stop, or restart Cloudflare Tunnels.
|Create a Cloudflare Tunnel||cloudflared tunnel run <TunnelName>|
|Delete a Cloudflare Tunnel||cloudflared tunnel delete <TunnelName>|
|List Cloudflare Tunnels||cloudflared tunnel list|
|Stop Cloudflare Tunnel||cloudflared tunnel stop <TunnelName>|
|Restart Cloudflare Tunnel||cloudflared tunnel restart <TunnelName>|
|Run Cloudflare Tunnel||cloudflared tunnel run <TunnelName>|
Visit Cloudflared’s Github website to learn more about the cloudflared tunnel.
Better, Faster, and Reliable Way to Remotely Access Wi-Fi Routers
Although you may remotely access and operate your routers using remote desktop software like TeamViewer or by opening a port and enabling the Remote Management option, none of these methods is safe.
You may, however, install a Cloudflare Tunnel on any supported device, such as a Windows, Mac, or Linux PC, or a Raspberry Pi Zero W, 2,3, 4, or an old laptop. Anyone with little to no experience can set up the Cloudflare Tunnel and securely connect to their router or other local instances from anywhere in the globe.
You are looking for information, articles, knowledge about the topic How to Securely Access Your Wi-Fi Router From Anywhere on internet, you do not find the information you need! Here are the best content compiled and compiled by the achindutemple.org team, along with other related topics such as: How.